Severn, MD → Hartford, CT
279 mi · 5h 35m (driving)
Current Risk
Low Risk
Clear conditions along your route
Severn
82°
Radnor Township
84°
40.9°
82°
Hartford
80°
Trip Briefing
3 segments · 279 mi · 5h 35m
Weather
🌤️ Mainly clear
84°F, wind 10 mph
Rest Stops
19
Restrooms, Truck svc, WiFi
Cameras
2 live
Clear driving conditions expected
Rest stops in this segment:
- ● Rest Area
- ● Rest Area 🚻
- ● TA
Normal Traffic
No traffic incidents reported
Traffic Cameras
See recent road conditions along your route
Images are snapshots updated periodically by state DOTs. Timestamps shown in images indicate when each photo was captured.
Choose your route:
Selected Route
Via I-97 North → I-895A → ... → I-684 North → I-84 East
Cameras shown are along this computed route
Need a custom route?
502031
Baltimore, MD
502020
Baltimore, MD
Saw Mill River Parkway North of Exit 20 (I-87)
NY
Saw Mill River Parkway South of Exit 25 (NY 9A)
NY
Saw Mill River Parkway South of Exit 26 (TSP)
NY
SMRP at Exit 26 South of TSP MM 15.36
NY
Saw Mill River Parkway South of Exit 39 (NY 117)
NY
Rest Stops Along Your Route
47 stops available
Swipe to see moreShowing 1-2 of 47
Get Weather Alerts for This Route
We'll notify you when conditions change before your trip. Never drive into a surprise storm again.
⚡ Recent Weather Events on This Route
Premium users received alerts for these conditions:
- 🌧️Aug 11: Rain advisory for afternoon departures
- ❄️Aug 9: Snow expected at higher elevations - consider earlier departure
- 🌫️Aug 6: Dense fog warning for morning travel
Don't miss the next alert →
Driving from Severn, MD to Hartford, CT covers 279 miles in roughly 5h 35m of drive time, crossing state lines. We track 7 live traffic cameras and 47 rest areas along this corridor so you can plan around them. Most drivers do this trip in one day; weather along the route matters more than the forecast at either endpoint, since you'll cross several climate zones.
7-Day Driving Outlook
Today
Aug 13
93° / 82°
No precip
Tomorrow
Aug 14
87° / 75°
No precip
Sat
Aug 15
85° / 74°
No precip
Sun
Aug 16
89° / 73°
No precip
Mon
Aug 17
89° / 76°
No precip
Tue
Aug 18
86° / 74°
No precip
Wed
Aug 19
86° / 74°
No precip
🗓️ Weekend Outlook
Saturday
Good to Go🌦️ Moderate rain showers at origin, ⛅ Partly cloudy at destination
Sunday
Use Caution⚠️ Hazardous conditions expected - Violent rain showers
Plan This Route
Get hour-by-hour weather forecasts, real-time traffic, and find the optimal departure time.
🚗 Live traffic included
See if current slowdowns affect your drive time
Free • No sign-up required
Current Conditions
Severn, MD
82°F
Wind: 9 mph
Hartford, CT
80°F
Wind: 8 mph
Weather data updated in real-time
Driving from Severn, MD to Hartford, CT
The 279-mile drive from Severn, Maryland to Hartford, Connecticut takes approximately 5h 35m under normal conditions. Weather along this route can vary significantly, especially across varying terrain where weather conditions can change rapidly. Route Outlook helps you find the safest time to travel by showing you weather conditions at every point along your route, timed to when you'll actually be there.
This moderate route crosses state lines from Maryland into Connecticut, connecting Severn and Hartford. A drive of 279 miles means you'll pass through multiple weather zones. Conditions at your starting point may bear little resemblance to what you'll encounter halfway through the trip.
Common Weather Hazards on This Route
- Sudden rain showers reducing visibility
- High winds affecting vehicle stability
- Seasonal weather changes impacting road conditions
Seasonal Driving Considerations
The Northeast corridor sees the full range of seasonal weather. Nor'easters from November through March can dump heavy snow and create whiteout conditions, while ice storms make roads treacherous. Summer and fall offer excellent driving conditions, though fall foliage season brings heavier traffic on scenic routes. Spring can bring unpredictable rain and residual freeze-thaw damage to road surfaces.
Best Time to Drive Severn to Hartford
For medium-distance drives like this 279-mile route, consider starting in the early morning to arrive before afternoon storms develop. Check the 7-day forecast above to find a day with favorable conditions along the entire route.
Driving Strategy
A 279-mile drive from Severn to Hartford takes a significant part of the day. Plan at least one fuel and rest stop along the way. If your route crosses elevation changes or state lines, expect weather conditions to shift mid-trip. Monitor the segment-by-segment forecast rather than just checking destination weather. Starting early in the morning typically avoids afternoon storm development and rush-hour congestion near urban areas.
Pro Tip
Use Route Outlook's departure optimizer to find the best time to leave. Our 4D trajectory engine considers weather at each point along your route at the exact time you'll be there — not just at your destination. It also integrates live data from traffic cameras, DOT 511 feeds, and road weather sensors.
Frequently Asked Questions
How long is the drive from Severn to Hartford?
The drive is approximately 279 miles and takes about 5h 35m under normal traffic and weather conditions. Severe weather can add significant time to your trip.
What's the best day to drive this route?
Based on current forecasts, Today (Aug 13) looks ideal. Clear conditions expected along the entire route
Is it safe to drive from Severn to Hartford today?
Current conditions show low risk along this route. Conditions look favorable for travel. Always stay alert and adjust speed for changing conditions.
Are there rest areas on the Severn to Hartford route?
Yes, there are 47 rest areas along this route. Facilities include restrooms, parking, and in some cases picnic areas and vending machines. Rest stops are spaced throughout the drive, so you'll never be too far from a break.
Can I see live traffic cameras on this route?
Yes, Route Outlook shows 7 live traffic cameras along this route, sourced from state DOT feeds. You can check road visibility, traffic flow, and pavement conditions in real time before and during your drive.
What highways does this route use?
This route primarily uses MD 100, Saw Mill River Parkway. Conditions can vary between highway segments, so check live camera feeds and road condition reports for each stretch before departing.
Are there any road closures on this route right now?
No significant incidents or road closures are currently reported along this route. Conditions can change quickly — this page updates automatically with the latest data from state DOT 511 systems.
Related Driving Guides
10 Essential Winter Driving Tips for Long Road Trips
Planning a winter road trip? Here are the essential safety tips to help you navigate snow, ice, and cold weather conditions.
🧊Black Ice: The Invisible Killer on Winter Roads
Black ice forms when rain or melting snow refreezes on cold road surfaces. Here's how to spot the conditions that create it.
🛡️Road Safety Features: Real-Time Conditions for Your Route
Real-time traffic incidents from 12 states, highway message signs, road conditions, and 25,000+ traffic cameras--integrated into your route planning.
Road Trip Guides Through This Area
Explore More Routes
More routes from Severn
More routes to Hartford
Similar-distance drives
More routes starting in MD
Don't Drive Blind Into Weather
Route Outlook shows you conditions at every point along your route—at the exact time you'll be there.
Open Planner